NAAC-Accredited 'A' - Grade 2(f) & 12(B) status (UGC) |ISO
9001:2015 Certified | FIST Funded (DST) SIRO(DSIR)

Mechanical Engineering - Publication

Yearwise Publications List :

S.No.

Name of Authors

Title of Paper

Name of Journal with ISSN No.

SCI/Scopus

Vol., Issue, Page No.

Published Month & Year

Dr. D. Senthil Kumar

Effect of surface wettability and surface roughness on sio2 and copper hybrid Thin film coated surfaces for nucleate boiling performance

Heat transfer research

SCI

51
(15)
1363-1381

2020

Dr.D. Senthilkumar

 

Experimental Investigation Of
Critical Heat Flux On Sio2 Thin Film Deposited Copper Substrate In Di Water At Atmospheric Pressure

Thermal Science

SCI

24 ,549-556

2020

Dr. D. Senthil Kumar

Performance and Characterization Studies of Reduced Graphene oxides Aqua Nanofluids for a Pool Boiling Surface

International Journal of Thermophysics

SCI

Volume 41
Number 6
PP:1-19

March 2020

Dr D. Senthil Kumar

Experimental investigation and characteristics of multi walled carbon nanotube aqua nanofluids from a flat plate heater surface in a pool

Material science & Nanotechnology

SCI

68,No.3,

July 2020

Dr. D. Senthil Kumar

Investigation of multiphase heat transfer by surface modification technique

Materials Today Proceedings

Scopus

22
3009-3017

July 2020

Dr. D. Senthil Kumar

Heat transfer study on different surface textured pin fin heat sink

International Communications in Heat and Mass Transfer

SCI

119

 

 

Dec 2020

 

 

Dr.K.Muralidharan

Combustion and Emission Behaviour of Honge Biofuel in a Thermal Barrier Coated Diesel Engine Suitable for Agriculture

Lecture Notes in Mechanical Engineering. Springer, Singapore

Scopus

121-127

Jan 2020

Dr.K.Muralidharan

Experimental Analysis on Emission Characteristics of Palmarosa Alkyl Group Biofuel Feedstock

Lecture Notes in Mechanical Engineering. Springer, Singapore

Scopus

129-137

Jan 2020

Dr.K.Muralidharan

Impact of Indian Geranium Grass Biodiesel Blends on Performance, Combustion and Emission Characteristics

International Journal of Thermophysics

SCI

41

July2020

10 

Dr.K. Muralidharan

Mitigation of Carbon Dioxide Gas from a DI Diesel Engine Fuelled with Honge Biodiesel for Agriculture

Lecture Notes in Mechanical Engineering  Recent Trends in Mechanical Engineering Online ISBN
978-981-15-7557-0

Scopus

25-36

 

 

Oct  2020

 

11 

Dr.K.Muralidharan

Reduction of Greenhouse Gases from a Coated Diesel Engine Fuelled with Honge Biodiesel for Sustainable Environment

Lecture Notes in Mechanical Engineering  Recent Trends in Mechanical Engineering Online ISBN
978-981-15-7557-0

Scopus

37-46

Oct  2020

12 

Dr.K.Muralidharan

Prediction of Wear Characteristics of Polymer Composites by ANN Modified by GA

Lecture Notes in Mechanical Engineering  Recent Trends in Mechanical Engineering  Online ISBN
978-981-15-7557-0

Scopus

231-237

Oct  2020

13 

Dr.K.Muralidharan

Investigation on Effect of Industrial Waste on Tribological Properties of Polymer Composites

Lecture Notes in Mechanical Engineering  Recent Trends in Mechanical Engineering Online ISBN
978-981-15-7557-0

Scopus

695-703

Oct  2020

14 

Dr.K.Muralidharan

Experimental Investigation on Equally Treated Banana / Sisal Fibers Based Hybrid Composite

AIP Conference Proceedings

Scopus

020083-1
–   
020083-11

Jan 2020

15 

Dr.K.Muralidharan

Study Of Flexural Strength And Flexural Modulus On Chicken Feather Fiber Used Fiber Reinforced Polyester Composite,

AIP Conference Proceedings

Scopus

020079-1          
–                        020079-6

Jan 2020

16 

Dr.K.Muralidharan

Experimental Investigation Of Tensile Strength And Tensile Modulus Of Fiber Reinforced Polyester By Using Chicken Feather Fiber

AIP Conference Proceedings

Scopus

020077-1            
–                        020077-6

Jan 2020

17 

Dr.K.Muralidharan

Study of Storage Modulus, Lose Modulus and Abrasion on Fiber Reinforced Polyester Composites with locally available fiber of Chicken Feathers

AIP Conference Proceedings

Scopus

020078-1           
–                        020078-6

Jan 2020

18 

Dr.K.Muralidharan

Investigation on Synthesize and Characterizations Hybrid Composite with Treated Banana Fibers

AIP Conference Proceedings

Scopus

020080-1
-   
02008-10

Jan 2020

19 

Dr.R.Mohan

Experimental And Numerical Analysis Of Diesel Engine Exhaust Heat Recovery Using Triple Tube Heat Exchanger

Thermal Science

SCI

Volume 24, Issue 1 Part B  Pages: 525-531

2020

20 

Dr.R.Mohan

Role of method of synthesis on the size of flakes, dispersion stability and thermophysical properties of aqua based reduced graphene oxide nanofluids

Journal of Thermal Analysis and Calorimetry

SCI

 

          144(119)

March 2020

21 

Dr.R.Mohan

Analysis On Measurement Of Mechanical Properties / Sandwich
Structures With Negative Poisson Ratio Honeycomb Core

International Journal of Mechanical and Production
Engineering Research and Development (IJMPERD)
ISSN(E): 2249–8001

Scopus

Vol. 10, Special Issue, 61–69

Feb 2020

22 

Dr.R.Mohan

Analysis On Phase Change Material Applied In Solar Desalination System

International Journal of Mechanical and Production
Engineering Research and Development (IJMPERD)
ISSN(E): 2249–8001

Scopus

Vol. 10, Special Issue, 39–48

Feb 2020

23 

Dr.R.Mohan

Numerical Analysis of Diesel Engine Performance Fitted with Turbonator in the Intake Manifold

Tierärztliche Praxis

Scopus

Vol 40
357-367

2020

24 

Dr.R.Mohan

Experimental investigation on surface roughness, tool wear and cutting force in turning of hybrid
(Al7075 + SiC + Gr) metal matrix composites

Journal of Materials Research and Technology

SCI

Volume 9, Issue 6,  Pages 16529-16540

Nov–Dec 2020

25 

Dr.A Jegan

Assessment On The Microhardness And Corrosion Resistance Characteristics Of Ni-Sic And Ni-Mwcnt Coatings By Pulse Reverse Electrodeposition Technique

Materials Research Express –IOP

SCI

7 (2020) 055012

May 2020

26 

Dr.A Jegan

Performance Analysis Of Aircraft Morphed Wing With Naca0021 Airfoil

Journal of the Balkan Tribological Association

Scopus

Vol. 26, No 2, 428–440 (2020)

May 2020

27 

Dr.A Jegan

A study of selectively deformable structure of wing of an aircraft

International journal of advanced science and technology
ISSN 2005-4238

Scopus

Vol.29,No.7
PP 12191-12204

May 2020

28 

Dr.A Jegan

Wear behavior of Ni-tio2 nano-composite coating on AISI 1022 CS by pulse electrodeposition

Journal of New Materials for Electrochemical systems

SCI

23,3,177-181

July 2020

29 

Dr.A Jegan

Effect of Sintering Temperature on (Hss-Tic) Cutting Tool Life Enhancement for Cast Iron machining

Test Engineering and Management

Scopus

Page No. 11922 – 11930

May-June 2020

30 

Dr.V.M.Madhavan

The synergetic effect between hydrogen addition and EGR on cashew nut shell liquid biofuel- diesel operated engine

Journal of FUEL    ISSN: 0016-2361

SCI

Vol: 266

April 2020

31 

Dr.V.M.Madhavan

Investigation on the effect of diethyl ether with hydrogen-enriched cashew nut shell (CNS) biodiesel in direct injection (DI) diesel engine

Journal of FUEL    ISSN: 0016-2361

SCI

277,
1,
118165

Oct 2020

32 

Dr.P.Balasubramani

Implications Of Planned Downtime In Screw Type Biomass Briquette
Manufacturing

Aut Aut Research Journal,  ISSN:0005-0601

 

Scopus

Volume 11, Issue 4

April 2020

33 

Dr.P.Balasubramani

Experimental investigations on wear properties of AlTiN coated 316 LVM Stainless Steel (TAEN-2020-0252)

 

Materials Today: Proceedings,  Elsevier,   ISSN 2214-7853
.

Scopus

doi.org/10.1016/j.matpr.2020.05.359

June 2020

34 

Dr.S.Mahalingam

Colloidal release in high temperature porous media with oversaturated fins during supercritical CO2 transport

Journal of Petroleum Science and Engineering

SCI

192 & 1-10

Sep 2020

35 

Dr.S.Mahalingam

Execution Analysis of Vapor-Compression Refrigeration System Using R12, r134a, R290 and R600a as Working Medium

Advances in Materials and Manufacturing Engineering

SCOPUS

7 & 9-17

Sep 2020

36 

Dr.S.Mahalingam

Exploratory and Performance Analysis of Solar Refrigeration System Using Nano fluids —A Review

Advances in Automotive Technologies

SCOPUS

181 & 241-247

Sep 2020

37 

Dr.S.Mahalingam

Experimental investigation on varying flame characteristics of benzoic resin solid fuel pellets

Renewable Energy

SCI

Volume 147, Part 1,
Pages 1500-1510

March 2020

38 

Dr.K. G.Saravanan

Investigation On Conventional Braking With High Speed Performance Electromagnetic Braking System

International Journal of Advanced Science and Technology

SCOPUS

29& 4712-4726

Jul 2020

39 

Dr.K. G.Saravanan

Design and Fabrication of Guide Attachment in Auto-Pneumatic Tapping Machine

International Journal of Advanced Science and Technology

SCOPUS

29& 3820-3835

Jul 2020

40 

Dr.K. G.Saravanan

Design of balanced Mechanism For Wheelchair to Moving on Stairs

International Journal of Mechanical and Production Engineering Research and Development

SCOPUS

10& 11753-11762

Sep 2020

41 

Dr.K. G.Saravanan

Parametric optimization of chrome composite through ultrasonic machining using taguchi approach

Materials today  Proceedings

SCOPUS

12

Oct 2020

42 

Dr.K. G.Saravanan

Design and Development of Thermoacoustic Refrigerator Using Piezolelectric Speaker

Test Engineering and Management

SCOPUS

Volume 82,
Page No. 14186 – 14190

March – April 2020

43 

Dr.K Venkatesh raja

Machine learning in optimization of multi-hole drilling using a hybrid combinatorial IGSA algorithm

Concurrent Engineering Research and Applications ISSN: 1531-2003

SCI

DOI: https://doi.org/10.1177/1063293X20908318

March 2020

44 

Dr.V. Ravikumar

Design and Experimental heat transfer analysis of shelicalHx

Test Engineering and Management

SCOPUS

Vol. 83 Page No. 13748-13754

May 2020

45 

Dr.V. Ravikumar

Study on the effect of 2-butoxyethanol as an additive on the combustion flame, performance and emission characteristics of a spark ignition engine

Fuel

SCI

285 & 119187

Oct 2020

46 

Mr.S.Lakshmana Kumar

Prediction of Paper Mill Waste Water Treatment Process Parameters in Sequencing Batch Reactor using Fuzzy Logic Technique

International Journal of Recent Technology and Engineering (IJRTE)
ISSN : 2277 – 3878

SCOPUS

Volume 8, Issue- 5
Page No: 1929 – 1937

Jan 2020

47 

Mr.S.Lakshmana Kumar

A novel methodology for the design of semi active control loop system in Magneto Rheological Fluid suspension system for on road vehicle condition

IAETSD – JARAS   Journal for Advanced Research in Applied Sciences
ISSN : 2394 – 8442

SCOPUS

Volume 7 , Issue 3
Page No: 13 – 33.

March 2020

48 

Mr.S.Lakshmana Kumar

Study of combustion characteristics on single cylinder direct injection diesel engine with plasma and HVOF coated ceramic powders on piston crown

Materials Today : Proceedings

SCOPUS

33 & 989-994

Jul 2020

49

Mr.S.Lakshmana Kumar

Characterization of waste plastic oil as biodiesel in IC engines

Materials Today : Proceedings

SCOPUS

33& 833-838

Jul 2020

50 

Mr.S.Lakshmana Kumar

Conformable auxetic fixtures for drilling of brittle materials

Tierärztliche Praxis
ISSN: 0303-6286

Scopus

Vol 40
1598-1610

Nov 2020

51 

Mr.A.Sivapragasam

Experimental investigation on thermal performance of plate fit heat sinks with nano pcm

Journal of Thermal Science, ISSN 2334-7163

SCI

Vol.24, Issue No.1B, pp.437-446

Feb 2020

52 

Mr.V.Kaviarasan

Non-dominated sorting modified teaching–learning-based optimization for multi-objective machining of polytetrafluoro ethylene (PTFE)

Intelligent Manufacturing
ISSN:0956-5515
(Springer)

SCI

Vol.31,
Issue 4,
911–935

 

April 2020

53 

Mr.V Kavirasan

Characterization techniques for nano particles: A practical top down approach to synthesize copper nano particles from copper chips and determination of its effect on planes

Materials today: proceedings
ISSN: 2214-7853

Scopus

Volume 33, Part 7, Pages 2626-2630

2020

54 

Mr.A.R.Venkataramanan

Design and CFD Analysis of Exhaust Manifold for the Four - Cylinder SI Engine using Alternate Fuels

Test Engineering and Management

Scopus

82,
11792 – 11803

Feb 2020

55 

Mr.R.Yuvaraj

Study of droplet dynamics and condensation heat transfer on super hydrophobic copper surface

Thermal Science
ISSN 2334-7163

SCI

https://doi.org/10.2298/TSCI190126089Y

Mar 2020

56 

Mr.R.Yuvaraj

Numerical simulation of thermal wave propagation and collision in thin film using finite element solution

Journal of Thermal Analysis and Calorimetry

SCI

 

https://doi.org/10.1007/s10973-020-09346-y

Jan 2020

57 

Mr.A.Mahendran

Design And Development Of Non Intersecting Gear Mechanism By Forced Ball Drive

Test Engineering & Management

Scopus

Vol.83

May 2020

58 

Dr.A.Ranjithkumar

A review on the effect of electro chemical machining on metal matrix composite materials

Materials today :proceedings
ISBN:2214-7853

Scopus

Volume 33, Part 7, Pages 3854-3857

2020

59 

Mr.V.Suresh

Modelling and Simulation of Vanadium Penta Oxide Based Field Effect Transistors

International Journal of Advanced Science and Technology
ISSN:2005-4238

Scopus

Vol.29
No.7
PP-13801-13
809

May 2020

60 

Mr.V.Suresh

Microstructure, Mechanical and Tribological Characteristics of Plasma and HVOF Sprayed Cr3C2-PS.Zro2 Coatings

Materials Today-Proceedings

 

Scopus

Vol.33, part 1,2020
Pages 1137-1143

Aug 2020

61 

Mr.G.Sivaraman

 

Experimental Investigation on effect of modified solar collector in solar water heating system.

Thermal science
ISSN 2334-7163

SCI

Vol.24.,
No.1B.,
pp 481 – 485

Jan2020

62 

Mr.U.Gobikrishnan

Effect of ceramic particulate addition on Aluminium based Ex-situ & In-situ formed Metal matrix composites

Metals and Materials International
Springer

 

SCI

26,9, 1-14

Sep 2020

63 

Mr.U.Gobikrishnan

Effect of waste tyre particles reinforcement on mechanical properties of jute and abaca fiber- epoxy hybrid composites with pre-treatment

Materials Today-Proceedings

 

Scopus

Volume 37, Part 2
1377-1380

 

 

Aug 2020

64 

Mr.U.Gobikrishnan

Drilling investigations on Inconel alloy 625 material of material removal rate using micro electrochemical machining

Materials Today-Proceedings

Scopus

Volume 37, Part 2
1629-1633

 

Aug 2020

65 

Mr.P.Kumaravel

Investigation of Bending, Sound absorption and Damping properties of AZ91D- Swivel Plate

Advances in Materials Science and Engineering

SCI

Volume 2020

May 2020

66 

Mr.M.Suresh

Experimental Study on Extracting of Lemon Grass Oil with Different Drying Conditions

GIS Science Journal
ISSN NO.1869-9391

Scopus

Vol. 7
Issue 10
222-227

Oct 2020

67 

Mr.M.Suresh

Experimental study on performance of four stroke twin cylinder diesel engine by using diesel blend with waste cooking oil

Journal of Saybold Report
ISSN NO.1533-9211

Scopus

Vol. 15
Issue 9

Sep 2020

68 

Mrs.K.Aparna  srijana

Approach of current Generation from Vortex Bladeless Windmill

Journal of Xidian University

Scopus

Vol.14 Issue 5

2020

69 

Dr.A..Dominic

A Review article of Gastroretentive  Drug delivery system

Journal of Global Pharma Technology (JGPT)
ISSN 0975-8542

Scopus

NA

May 2020

70 

Dr.A..Dominic

TelePharmacy- Review

Journal of Global Pharma Technology (JGPT) ISSN 0975-8542

Scopus

NA

May 2020

71 

Mr.L.Gokulanathan

Electrochemical Micromachining of Titanium Alloys- A Review

Test Engineering & Management

Scopus

Vol. 83 Page No.11766-11781

May 2020

72 

Mr.L.Gokulanathan

Microhole Drilling of Aluminium 6063 using Electrochemcial Micromachining

Test Engineering & Management

Scopus

Vol. 83 Page No.11757-11765

May 2020

S.No Authors Title of the Paper Int Journal Name Month /Year Publisher DOI ISSN No Vol No Iss No P.No IF Indexing (SCI/SCIE/SCOPUS/WoS/ICI/Others)
1 Dr.S. Mahalingam Adiabatic behavior of gas wells due to natural reservoir fines migration: analytical model and CFD study Journal of Petroleum Exploration and Production Technology Apr-19 Springer Nature Switzerland AG.Part of Springer Nature-Springer International Publishing https://doi.org/10.1007/s13202-019-0670-5 ISSN: 2190-0558 (Print) 2190-0566 (Online) 9 32  1-14 1.6 Scopus
2 Dr.S. Mahalingam Environmental impact of VCR Diesel Engine characteristics using blends of cotton seed oil with nan additives. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects Apr-19 Taylor

&

 Francis

https://doi.org/10.1080/15567036.2019.1602196 1556-7036 12    1-13 0.75 Sci
3 Dr.P. Suresh Finite Element analysis of Bending and Dynamic Response of a power Transmission Spur gear Advances in Manufacturing Technology Apr-19 Springer Nature Switzerland https://link.springer.com/chapter/10.1007/978-981-13-6374-0_57       511-525    
4 Dr A Jegan Development of numerical model for predicting the characteristics of Ni-Sic nano composite coatings on AISI100 substrate Materials Research Express (IOP Publishers) May-19  IOP Publishing Ltd https://iopscience.iop.org/article/10.1088/2053-1591/ab1ac4/meta Online ISSN: 2053-1591 6 8 1--21 1.449  
5 Dr.S. Mahalingam Subcritical Co2 effects on kaolinite fines transport in porous limestone media Journal of Petroleum Exploration and Production Technology Jul-19 Springer International Publishing https://link.springer.com/article/10.1007/s13202-019-0739-1 ISSN: 2190-0558 (Print) 2190-0566 (Online) 4 2190-0558 1--9 1.6 Scopus
6 Dr.D. Senthil kumar Performance analysis on heat transfer characteristics of heat SINK with baffle attachment International Journal of Thermal Sciences Aug-19 Elsevier https://doi.org/10.1016/j.ijthermalsci.2019.04.002 1290-0729 1778-4166 Volume 142    14-19 3.488 Sci 
7 Dr.D. Senthil kumar and  Dr V Ravikumar Reduction of smoke and NOx from the combined effect of thermal barrier coatings and Raphanus sativus biodiesel in a diesel engine for transport sector International Journal of Green Energy Aug-19 TAYLOR AND FRANCIES https://doi.org/10.1080/15435075.2019.1653873 ISSN: 1543-5075 Online ISSN: 1543-5083 16 13 1016-1023 1.302 Sci
8 V.Kaviarasan Non dominated sorting modified teaching learning based optimization for multi objective machining of polytetrafluoroethlene(PTFE) Journal of intelligent manufacturing 19-Aug Springer https://link.springer.com/article/10.1007/s10845-019-01486-9 Online ISSN
1572-8145 ,ISSN:0956-5515
30 179 1--25 3.535 sci
9 Dr.K.Venkateshraja The haptic and perceptional characterisitics of an anthromorphic curved soft finger structure Curved and Layered Structures 19-Sep De Gruyter Open https://doi.org/10.1515/cls-2019-0013 OnlineISSN2353-7396 6 1 161 - 168 1.6 Sci
10 V.Kaviarasan Prediction of surface quality and optimization in drilling of delrin using neural network Progress in Rubber plastics and Recycling Technology Aug--19  SAGE publishers  https://journals.sagepub.com/doi/abs/10.1177/1477760619855078 ISSN: 1477-7606   Online ISSN: 1478-2413  35 3 149-169 0.559 Sci
11 Dr.S. Mahalingam Numerical and experimental invvestigation on the effect of retrograde vaporization and drift in porous oil reserviou:roles of phase change heat transfer and saturation Journal of Petroleum Exploration and Production Technology May--19 Springer International Publishing https://link.springer.com/article/10.1007/s13202-019-0692-z ISSN: 2190-0566      1--11     Scopus
S.No Authors Title of the Paper Int Journal Name Month / Year Publisher DOI ISSN No Vol No Issue.No P.No Indexing (SCI/SCIE/SCOPUS/WoS/ICI/Others) Indexing S.No Citation
1 Dr. D. Senthil Kumar Experimental investigation on heat transfer characteristics of an oblique finned microchannel heat sink with different channel cross sections Heat and Mass Transfer Jun-18 Wärme- und Stoffübertragung 10.1007/s00231-018-2398-z 0947-7411 54 12 3810-3817 Scopus / Web of science    
2 Dr. D. Senthil Kumar Impact Of Fuel Injection Advance On Combustion And Gas Emissions In A Tbc Engine Fuelled With Honge Biodiesel Ecology, Environment and Conservation Mar-18 EM International   0971-765X Suppl 24 2 37-41 Scopus / Web of science 14598  
3 Dr. D. Senthil Kumar Environmental effects of a single cylinder of DI diesel engine fuelled with non-edible pongamia biodiesel feedstock used for agriculture international journal of pure and applied mathematics Feb-18 IJPAM.eu   1311-8080 118 20 1803-1808 Scopus    
4 Dr. D. Senthil Kumar Process Parameter Optimization for multifulel fired Lime Mud Reburning Kiln Operation by Taquchi Method Journal of science & technology for forest products and processes Feb-19 J-FOR           SCI    
5 Dr. P. Suresh Static analysis and weight reduction of aluminum casting Alloy connecting rod using finite element method
International Journal of Mechanical and Production Jun-18 TJPRC Pvt. Ltd.   2249-6890 Vol. 8, I 3 507-518 Scopus 2110081455  
6 Dr .K.Muralidharan Environmental effects of a single cylinder of DI diesel engine fuelled with non-edible pongamia biodiesel feedstock used for agriculture international journal of pure and applied mathematics Feb-18 IJPAM.eu   1311-8080 118 20 1803-1808 Scopus    
7 Dr .K.Muralidharan Impact Of Fuel Injection Advance On Combustion And Gas Emissions In A Tbc Engine Fuelled With Honge Biodiesel Ecology, Environment and Conservation Mar-18 EM International   0971-765X Suppl 24 2 37-41 Scopus / Web of science    
8 Dr. R.Mohan Experimental investigation on straight through solar salt water desalination system analysis in different PCM materials Journal of the Chinese Society of Mechanical Engineers Feb-18 Chinese SOC Mechanical Engineers   0257-9731 Vol.39 2 411-423 Scopus 2579731  
9 Dr. R.Mohan Performance enhancement analysis of mechanical
Behavior for chiral structure
Journal of the Chinese Society of Mechanical Engineers Feb-18     0257-9731 39 2 430-439 Scopus 2579731  
10 Dr. A.Jegan Pulse electrodeposition of Ni / Nano Al 2 03 composite coating on casting iron cylinder linear Materials Research Mar 26, 2018 UFSCar - Dep. de Engenharia de Materiais 10.1590/1980-5373-mr-2018-0060.  1516-1439 1 11 1 to 11 sci    
11 Prof. V.Kaviarasan Enhanced multi objective teaching learning based optimization for machining of delrin IEEE Access Sep-18 IEEE 10.1109/access.2018.2869040 2455-7581 Vol.6 51528-51546 Web of science / Scopus    
12 Prof.M.Pradeep kumar Evaluation of the surface integrity in the milling Of a magnesium alloy using an artificial neural Network and a genetic algorithm
Materiali in tehnologije / Materials and technology Jan-18 IMT PUBLISHER 10.17222/mit.2017.198 1580-2949 Vol. 9 I52/3 367–373 sci    
13 Prof. G.Sudharsan Static analysis and weight reduction of aluminum casting Alloy connecting rod using finite element method
International Journal of Mechanical and Production Jun-18 TJPRC Pvt. Ltd.   I2249-6890; Vol. 8, 3 507-518 Scopus 2110081455  
14 Prof.V. Suresh Static analysis and weight reduction of aluminum casting Alloy connecting rod using finite element method
International Journal of Mechanical and Production Jun-18 TJPRC Pvt. Ltd.   2249-6890 Vol. 8, 3 507-518 Scopus 2110081455  
15 Prof.Kaviarasan Evaluation of the surface integrity in the milling Of a magnesium alloy using an artificial neural Network and a genetic algorithm
Materiali in tehnologije / Materials and technology Jan-18 IMT PUBLISHER 10.17222/mit.2017.198 1580-2949 Vol. 9 52/3 367–373 sci    
16 Mr.V.Suresh DESIGN AND EXPERIMENTAL ANALYSIS OF A SOLAR DESALINATION SYSTEM International Journal of Physics and Research Dec-18 IJPR   2250-0030 Vol.8 1 11 to22 Scopus    
17 Mr.Sivaraman DESIGN AND EXPERIMENTAL ANALYSIS OF A SOLAR DESALINATION SYSTEM International Journal of Physics Dec-18 IJPR   2250-0030 Vol.8 1 11 to22 Scopus    
18 Mr.K.G.SARAVANAN Finite Element analysis of Axial Flow Turbine International Journal of advanced Research in basic engineering science and technology 18-Apr IJARBEST   2456-5717 Vol.4 4        
19 Mr.K.G.SARAVANAN Design and Analysis of Connecting Rod Using Aluminium Fly Ash International Journal of advanced Research in basic engineering science and technology 18-Apr IJARBEST   2456-5717 Vol.4 4        
20 Mr.K.G.SARAVANAN Numerical Investigation of Flow Through Modified Venturi Using Fluent International Journal of advanced Research in basic engineering science and technology 18-Apr IJARBEST   2456-5717 Vol.4 4        
21 Mr.K.G.SARAVANAN Analysis of Pump Impeller With Varying Number of Blades International Journal of advanced Research in basic engineering science and technology 18-Apr IJARBEST   2456-5717 Vol.4 4        
22 Mr.K.G.SARAVANAN Cylinder Deactivation on Four Stroke Engines International Journal of advanced Research in basic engineering science and technology 18-Apr IJARBEST   2456-5717 Vol.4 4        
23 Ms.Aparana A study on hybrid cooling System involving passive cooling technique with PV pannel roof International Journal for research in applied science and engineering Technology Mar-18 IJRASET   2321-9653 Vol.4 3 1641-1644 crossref 10.22214  
S.No Authors Title of the Paper Int Journal Name Month / Year Publisher DOI ISSN No Vol No Issue.No P.No Indexing (SCI/SCIE/SCOPUS/WoS/ICI/Others) Indexing S.No Citation
1 Dr. D. Senthil Kumar Evaporation rate and engine performance analysis of coated diesel engine using Raphanus sativus biodiesel and its diesel blends International Journal of Ambient Energy   Taylor & Francis http://www.tandfonline.com/toc/taen20/38/2?nav=tocList 0143-0750 38 2 202-208 SCI    
2 Dr. D. Senthil Kumar Channel cross section effect on heat transfer performance of oblique finned
microchannel heat sink
International Communications in Heat and Mass Transfer October / 2017 ScienceDirect http://dx.doi.org/10.1016/j.icheatmasstransfer.2017.03.016 0735-1933 87   270–276 WEB OF SCIENCE 20422  
3 Dr. D. Senthil Kumar Experimental Investigation on the Thermal Performance of Cavity Type Heat Sink with PCM International Journal of Applied Environmental Sciences 2017 Research India Publications   0973-6077 12 8 1547-1559 scopus indexed journals 19400157517  
4 Dr. D. Senthil Kumar Effect Of Steam Injection On Nox Emissions And Performance Of A Single Cylinder Diesel Engine Fuelled With Soy Methyl Ester Thermal Science Jan-17 Vinča Institute of Nuclear Sciences, Belgrade, Serbia https://doi.org/10.2298/ 2334-7163 Vol. 21 2 473-479 SCI    
5 Dr. P. Suresh investigation of diesel tank pressure using numerical and analytical methodes International Journal of Mechanical Engineering and Technology (IJMET) December / 2017 IAEME Publication ISSN Print: 0976-6340 and ISSN Online: 0976-6359   8 12 407-416 scopus   1
6 Dr. P. Suresh Experimental Investigation of Stainless steel 316L Micro Electro Chemical Process using RSM and ANFIS International Journal of Advanced Research in Basic Engineering Sciences and Technology (IJARBEST) May / 2017 IJARBEST PUBLICATIONS 10.20238/IJARBEST.2017.03s3805009 2456-5717 3 5 54-62 ICI    
7 Dr .K.Muralidharan Study of Exhaust Emission Characteristics by Ceramic Coated Diesel Engine using Rubber Seed Oil Blend with Pure Diesel Fuel International Journal of Applied Environmental Sciences 2017 Research India Publications   0973-6077 12 4 685-693 scopus indexed journals 19400157517  
8 Dr .K.Muralidharan Influence of TBC Coating and Honge Biodiesel on Diesel Engine Exhaust Emission Control International Journal of Applied Environmental Sciences 2017 Research India Publications   0973-6077 12 5 925-935 scopus indexed journals 19400157517  
9 Dr. R.Mohan Study On Concentric Tube Heat Exchanger With Different Nano Fluids For Enhancing The Heat Transfer: A Review Imperial Journal of Interdisciplinary Research (IJIR) 2017 Imperial Publishing House http://www.imperialjournals.com/index.php/IJIR/article/viewFile/5656/5436 2454-1362 3 9 682-688      
10 Dr. R.Mohan Experimental Investigation on the Thermal Performance of Cavity Type Heat Sink with PCM International Journal of Applied Environmental Sciences 2017 Research India Publications   0973-6077 12 8 1547-1559 scopus indexed journals 19400157517  
11 Dr. A.Jegan                        
12 Prof.V.M.Madhavan Effect Of Steam Injection On Nox Emissions And Performance Of A Single Cylinder Diesel Engine Fuelled With Soy Methyl Ester Thermal Science Jan-17 Vinča Institute of Nuclear Sciences, Belgrade, Serbia https://doi.org/10.2298/ 2334-7163 Vol. 21 2 473-479 SCI    
13 Dr. P.Balasubramani Developing a sustaunable frame work of bio mass briquetting cooperative to harness agro residues in india Asian journal of research in social sciences and humanities Mar-17 Asian Research Consortium 10.5958/2249-7315.2017.00217.9 2249-7315 7 3 922-934      
14 Prof.A.Sivapragasam Experimental Investigation on the Thermal Performance of Cavity Type Heat Sink with PCM International Journal of Applied Environmental Sciences 2017 Research India Publications   0973-6077 12 8 1547-1559 scopus indexed journals 19400157517  
15 Mr.M. Senthil Kumar A Study on Material Selection of IC Engine Piston under Static Loads International Journal of Advanced Research in Basic Engineering Sciences and Technology (IJARBEST) May-17 IJARBEST PUBLICATIONS https://www.ijarbest.com 2456-5717 3 5 29-37 scopus indexed journals    
16 Prof. G.Sudharsan Experimental Investigation of Stainless steel 316L Micro Electro Chemical Process using RSM and ANFIS International Journal of Advanced Research in Basic Engineering Sciences and Technology (IJARBEST) May / 2017 IJARBEST PUBLICATIONS 10.20238/IJARBEST.2017.03s3805009 2456-5717 3 5 54-62 ICI    
17 Prof. S. Vetrivel Design and analysis of single punching die for Al-Mg Alloy compopnents International journal of enginering science invention research and development (IJESIRD) July / 2017 Vidgan research group Publications http://www.ijesird.com/Copy%20of%20Vol.%204,%20Issue%201%20July%20(2017)%20-%20-%20Copy.html 2349-6185 4 1 54-59 scopus indexed journals    
18 Prof. S. Vetrivel Detailed study on copper composite bar using ANSYS Finite element methode International Journal of Innovative Research in Science, Engineering and Technology May / 2017     2319-853 Vol 6 8 56-60      
19 Prof. P. Kumaravel Experimental Investigation of Stainless steel 316L Micro Electro Chemical Process using RSM and ANFIS International Journal of Advanced Research in Basic Engineering Sciences and Technology (IJARBEST) May / 2017 IJARBEST PUBLICATIONS 10.20238/IJARBEST.2017.03s3805009 2456-5717 3 5 54-62 ICI    
20 Prof. P. Kumaravel A Study on Material Selection of IC Engine Piston under Static Loads International Journal of Advanced Research in Basic Engineering Sciences and Technology (IJARBEST) May-17 IJARBEST PUBLICATIONS https://www.ijarbest.com 2456-5717 3 5 29-37 scopus indexed journals    
21 Prof. U. Gobikrishnan Experimental Investigation of Stainless steel 316L Micro Electro Chemical Process using RSM and ANFIS International Journal of Advanced Research in Basic Engineering Sciences and Technology (IJARBEST) May / 2017 IJARBEST PUBLICATIONS 10.20238/IJARBEST.2017.03s3805009 2456-5717 3 5 54-62 ICI    
22 Prof. A. Ramesh Kumar Optimization of steering Geometry by design and analysis International Journal of Innovative Research in Science, Engineering and Technology Apr-17 IJIRSET   2319-8753 6 7 7-12 scopus indexed journals    
23 Dr. S. Mahalingam Effect of injection timing on emission analysis of a constant speed diesel engine running on biodiesel fuelled with pure diesel fuel International Journal of Advances in Scientific Research and Engineering Aug / 2017 IJARBEST PUBLICATIONS   2454-8006 3 1 180-185 scopus    
24 Dr. S. Mahalingam Performance and emission characteristics of a constant speed diesel engine fueled with Rubber seed oil and Jatropha oil (Dual fuel) blended with pure diesel fuel International Research Journal of Engineering and Technology (IRJET) Nov / 2017 IRJET   2395-0056/ 2395-0072 4 11 2146-2150      
25 Dr. S. Mahalingam Influence of TBC Coating and Honge Biodiesel on Diesel Engine Exhaust Emission Control International Journal of Applied Environmental Sciences 2017 Research India Publications   0973-6077 12 5 925-935 scopus indexed journals 19400157517  
26 Dr. S. Mahalingam Study of Exhaust Emission Characteristics by Ceramic Coated Diesel Engine using Rubber Seed Oil Blend with Pure Diesel Fuel International Journal of Applied Environmental Sciences 2017 Research India Publications   0973-6077 12 4 685-693 scopus indexed journals 19400157517  
27 Dr. S. Mahalingam Effect Of Steam Injection On Nox Emissions And Performance Of A Single Cylinder Diesel Engine Fuelled With Soy Methyl Ester Thermal Science Jan-17 Vinča Institute of Nuclear Sciences, Belgrade, Serbia https://doi.org/10.2298/ ISSN 2334-7163 Vol. 21 2 473-479 SCI    
28 Prof. M. Suresh A Study on Material Selection of IC Engine Piston under Static Loads International Journal of Advanced Research in Basic Engineering Sciences and Technology (IJARBEST) May-17 IJARBEST PUBLICATIONS https://www.ijarbest.com 2456-5717 3 5 29-37 scopus indexed journals    
29 Prof. P. ManikandaPrabu Hazard Identification Assessment And Control Measures In Iron And Steel Industry International Journal of Global Engineering (IJGE) 2017 techpublic.in   2456-3099 VOL 1 4 11-15      
30 Prof.V.R.Srinivashan A Study on Material Selection of IC Engine Piston under Static Loads International Journal of Advanced Research in Basic Engineering Sciences and Technology (IJARBEST) May-17 IJARBEST PUBLICATIONS https://www.ijarbest.com 2456-5717 3 5 29-37 scopus indexed journals    
S.No Authors Title of the Paper Int Journal Name Month / Year Publisher DOI ISSN No Vol No Issue.No P.No Indexing (SCI/SCIE/SCOPUS/WoS/ICI/Others) Indexing S.No Citation
1 Dr R Venkatesan Performance and emission characteristics of multi layer thermal barrier coated DI Diesel engine fuelled with Sunflower bio diesel International Journal of Applied Environmental Sciences 2016 Research India Publications   0973-6077 Vol 11 Number 1 267-277 scopus indexed journals 19400157517  
2 Dr R Venkatesan Investigation and Multi Objective Optimization of MRR and TWR using Taguchi Technique in Micro Electro Discharge Machining Asian Journal of Research in
Social Sciences and Humanities
2016 Asian Research Consortium 10.5958/2249-7315.2016.00353.1 2249-7315 vol 6 issue 6 2165-2174 ICI-Index Copernicus    
3 Dr. D. Senthil Kumar Influence of Fuel Injection Pressure on Combustion and Gas Emissions in a TBC Diesel Engine Fuelled with Pongamia Bio-Fuel Blends for Sustainable Environment Asian Journal of research in social sciences and humanities 2016 Asian Research Consortium   2249-7315 vol 6 issue 6 42417 ICI-Index Copernicus    
4 Dr. D. Senthil Kumar Experimental investigation of NOx emission on a single cylinder diesel engine using low pressure steam injection Advances In Natural And Applied Sciences Jun-16 AENSI Publisher    1995-0772   Special10(9) 220-226 scopus indexed journals 19500157807  
5 Dr. D. Senthil Kumar Performance Analysis Of Diesel Blends As
Additive Ethanol, Di-Ethyl-Either And Iso
Butanol Fuel For C I Engines
Advances In Natural And Applied Sciences Jun-16 AENSI Publisher    1995-0772   Special10(9) 154-162 scopus indexed journals    
6 Dr. P. Suresh Investigation and Multi Objective Optimization of MRR and TWR using Taguchi Technique in Micro Electro Discharge Machining Asian Journal of Research in
Social Sciences and Humanities
2016 Asian Research Consortium 10.5958/2249-7315.2016.00353.1 2249-7315 vol 6 issue 6 2165-2174      
7 Dr. P. Suresh Nano powder mixed ECM of Inconel 718 using ANFIS and RSM International Journal of Advanced Engineering Technology 2016 Technical Journal   0976-3945 vol 8 issue 2 546-552 ICI    
8 Dr. P. Suresh Prediction of Surface Roughness Model for Nano Copper Suspended Electrochemically Machined Inconel 718 using ANFIS Asian Journal of Research in
Social Sciences and Humanities
2016 Asian Research Consortium 10.5958/2249-7315.2016.00382.8 2249-7315 vol 6 issue 6 104-113 ICI-Index Copernicus    
9 Dr .K.Muralidharan Influence of Fuel Injection Pressure on Combustion and Gas Emissions in a TBC Diesel Engine Fuelled with Pongamia Bio-Fuel Blends for Sustainable Environment Asian Journal of research in social sciences and humanities 2016 Asian Research Consortium   2249-7315 vol 6 issue 6 42417 ICI-Index Copernicus    
10 Dr P Thamilarasi Corrosion analysis of cuplex SS316L pulsed electrodeposited robotic GMAW component using response surface methodology Asian Journal of research in social sciences and humanities 2016 Asian Research Consortium   2249-7315 vol 6 issue 6 46-55      
11 Dr P Thamilarasi Analyzing the effect of process parameters bead geometry in robotic GMAW using techniques Asian Journal of research in social sciences and humanities 2016 Asian Research Consortium   2249-7315 vol 6 issue 6 32-45      
12 Dr P Thamilarasi An investigation on the mechanical properties of Ni-Nano-Mg composite coatings on ASTM A284 grade -A by pulsed electro deposition using taguchi methode Asian Journal of research in social sciences and humanities 2016 Asian Research Consortium   2249-7315 vol 6 issue 7 21-31 ICI-Index Copernicus    
13 Dr P Thamilarasi Tribological analysis of pulse electro-1 Ni/Nano-Mg Composite coatings using RS Asian Journal of research in social sciences and humanities 2016 Asian Research Consortium   2249-7315 vol 6 issue 6 2251-2261 ICI-Index Copernicus    
14 Dr. R.Mohan Design And Synthesis Of Six Legged
Walking Robot Using Single Degree Of
Freedom Linkage
Imperial Journal of Interdisciplinary Research (IJIR) Aug-16 Imperial Publishing House   2454-1362 Vol-2 Issue-3 476-483 ICI-Index Copernicus    
15 Dr. R.Mohan Shape Orientation of Chiral Structure Honeycomb Layer in Both Compression and Tension Analysis Asian Journal of Research in Social Sciences and Humanities Sep-16 Asian Research Consortium   2249-7315 Vol. 6 No. 9 1624-1631 ICI-Index Copernicus    
16 Dr. R.Mohan Performance and Emission Characteristics of a Direct Injection Diesel Engine fuelled with Jatropha and Rubber Seed Oil Blends with Pure Diesel Fuel Asian Journal of Research in Social Sciences and Humanities Sep-16     2249-7315 Vol. 6 No. 9 46-55 ICI-Index Copernicus    
17 Dr. A.Jegan Surface modification of mild steel by electrodeposition process with Ni-ZRO2 Advances In Natural And Applied Sciences Jun-16 AENSI Publisher    1995-0772   Special10(9) 49-53 scopus indexed journals    
18 Prof.V.M.Madhavan Experimental investigation of NOx emission
on a single cylinder diesel engine using low
pressure steam injection
Advances In Natural And Applied Sciences Jun-16 AENSI Publisher    1995-0772   Special10(9) 220-226 scopus indexed journals 19500157807  
19 Dr. P.Balasubramani Biomass briquette manufacturing system model for environment Journal of alloys and componends   Sciencedirect   0925-8388 686   859-865 WEB OF SCIENCE   3.05
20 Prof.M.Manimurugan Performance Analysis Of Diesel Blends As
Additive Ethanol, Di-Ethyl-Either And Iso
Butanol Fuel For C I Engines
Advances In Natural And Applied Sciences 2016 AENSI Publisher    1995-0772   Special10(9) 154-162 scopus indexed journals 19500157807  
21 Mr.M. Senthil Kumar Study Of Surface Heat Treatment And Its
Effects On Fatigue Behavior Of Steel – A
Review
Advances In Natural And Applied Sciences Jun-16 AENSI Publisher    1995-0772   Special10(9) 309-318 scopus indexed journals    
22 Mr.M. Senthil Kumar Investigation Of Surface Coating On Wear,
Corrosion And Fatigue Behavior Of Steel – A Review
Advances In Natural And Applied Sciences Jun-16 AENSI Publisher    1995-0772   Special10(9) 319-325 scopus indexed journals    
23 Mr.M. Senthil Kumar Influence Of Different Surface Treatments On Fatigue Behavior Of En8 Steel Advances In Natural And Applied Sciences Jun-16 AENSI Publisher    1995-0772   Special10(9) 326-341 scopus indexed journals    
24 Mr.M. Senthil Kumar Effect of heat treatment on the fatigue behavior Of en8 steel ARPN Journal of Engineering and Applied Sciences   Asian Research Publishing Network (ARPN).   1819-6609 VOL. 11 NO. 2 1819-6608      
25 Mr.M. Senthil Kumar Fatigue behavior of ni-zn composite coating on en8 steel
By pulse electroplating
ARPN Journal of Engineering and Applied Sciences   Asian Research Publishing Network (ARPN).   1819-6609 VOL. 11 NO. 2 1376-1383      
26 Dr. K.G.Saravanan Experimental and Numerical Investigation
on Magneto Rheological Based Semi Active
Control Suspension System for Vehicle on
Different Road Condition
Advances In Natural And Applied Sciences Jun-16 AENSI Publisher    1995-0772   Special10(7) 100-111 scopus indexed journals    
27 Prof. A.Mahendran Surface modification of mild steel by electrodeposition process with Ni-ZRO2 Advances In Natural And Applied Sciences Jun-16 AENSI Publisher    1995-0772   Special10(9) 49-53 scopus indexed journals    
28 Prof. E Mohankumar Corrosion analysis of cuplex SS316L pulsed electrodeposited robotic GMAW component using response surface methodology Asian Journal of research in social sciences and humanities 2016 Asian Research Consortium   2249-7315 vol 6 issue 6 46-55      
29 Prof.Mr.E.Mohankumar Analyzing the effect of process parameters bead geometry in robotic GMAW using techniques Asian Journal of research in social sciences and humanities 2016 Asian Research Consortium   2249-7315 vol 6 issue 6 32-45      
30 Prof.Mr.E.Mohankumar An investigation on the mechanical properties of Ni-Nano-Mg composite coatings on ASTM A284 grade -A by pulsed electro deposition using taguchi methode Asian Journal of research in social sciences and humanities 2016 Asian Research Consortium   2249-7315 vol 6 issue 7 21-31 ICI-Index Copernicus    
31 Prof.Mr.E.Mohankumar Tribological analysis of pulse electro-1 Ni/Nano-Mg Composite coatings using RS Asian Journal of research in social sciences and humanities 2016 Asian Research Consortium   2249-7315 vol 6 issue 6 2251-2261 ICI-Index Copernicus    
32 Prof. P. Kumaravel Experimental and Numerical Investigation
on Magneto Rheological Based Semi Active
Control Suspension System for Vehicle on
Different Road Condition
Advances In Natural And Applied Sciences Jun-16 AENSI Publisher    1995-0772   Special10(9) 100-111 scopus indexed journals    
33 Dr. S. Mahalingam Performance and Emission Characteristics of a Direct Injection Diesel Engine fuelled with Jatropha and Rubber Seed Oil Blends with Pure Diesel Fuel Asian Journal of Research in Social Sciences and Humanities Sep-16     2249-7315 Vol. 6 No. 9 46-55 ICI-Index Copernicus    
34 Prof. M. Suresh Study Of Surface Heat Treatment And Its
Effects On Fatigue Behavior Of Steel – A
Review
Advances In Natural And Applied Sciences Jun-16 AENSI Publisher    1995-0772   Special10(9) 309-318 scopus indexed journals    
35 Prof. M. Suresh Investigation Of Surface Coating On Wear,
Corrosion And Fatigue Behavior Of Steel – A Review
Advances In Natural And Applied Sciences Jun-16 AENSI Publisher    1995-0772   Special10(9) 319-325 scopus indexed journals    
36 Prof. M. Suresh Influence Of Different Surface Treatments On Fatigue Behavior Of En8 Steel Advances In Natural And Applied Sciences Jun-16 AENSI Publisher    1995-0772   Special10(9) 326-341 scopus indexed journals    
37 Prof. M. Suresh Effect of heat treatment on the fatigue behavior Of en8 steel ARPN Journal of Engineering and Applied Sciences   Asian Research Publishing Network (ARPN).   1819-6609 VOL. 11 NO. 2 1819-6608      
38 Prof. M. Suresh Fatigue behavior of ni-zn composite coating on en8 steel
By pulse electroplating
ARPN Journal of Engineering and Applied Sciences   Asian Research Publishing Network (ARPN).   1819-6609 VOL. 11 NO. 2 1376-1383      
39 Prof. V.R.Srinivashan Study Of Surface Heat Treatment And Its
Effects On Fatigue Behavior Of Steel – A
Review
Advances In Natural And Applied Sciences Jun-16 AENSI Publisher  &nbnbsp; 1995-0772   Special10(9) 309-318 scopus indexed journals    
40 Prof.V.R.Srinivashan Investigation Of Surface Coating On Wear,
Corrosion And Fatigue Behavior Of Steel – A Review
Advances In Natural And Applied Sciences Jun-16 AENSI Publisher    1995-0772   Special10(9) 319-325 scopus indexed journals    
41 Prof.V.R.Srinivashan Influence Of Different Surface Treatments On Fatigue Behavior Of En8 Steel Advances In Natural And Applied Sciences Jun-16 AENSI Publisher    1995-0772   Special10(9) 326-341 scopus indexed journals    
42 Prof.V.R.Srinivashan Effect of heat treatment on the fatigue behavior Of en8 steel ARPN Journal of Engineering and Applied Sciences   Asian Research Publishing Network (ARPN).   1819-6609 VOL. 11 NO. 2 1819-6608      
43 Prof.V.R.Srinivashan Fatigue behavior of ni-zn composite coating on en8 steel
By pulse electroplating
ARPN Journal of Engineering and Applied Sciences   Asian Research Publishing Network (ARPN).   1819-6609 VOL. 11 NO. 2 1376-1383      
S.No Authors Title of the Paper Int Journal Name Year Publisher Indexing (SCI/SCIE/SCOPUS/WoS/ICI/Others) Indexing S.No Citation
1 Mr.R.Venkatesan and Mr.C.Venkatesan Optimization of Process parameters of Hot extrusion of Sic/Al 6061 composite using Taguchi's technique and upper bound technique Materials and manufacturing 2015 Taylor and Francis SCOPUS 21054 1
2 Dr P. Suresh Development of low cost 3 axes Table top Micro Electro Discharge Machining (MicroEDM) International Journal of Applied Engineering Research 2015 Research India Publications SCOPUS 19400157517 -
3 Dr P. Suresh Optimization of processing parameters in Electrochemical machining of AISI 202 using Response surface methodology Journal of Engineering Science and Technology 2015 School of Engineering, Taylor's University SCI   4
4 Dr.D.Senthilkumar Experimental investigation of evaporation rate and emission studies of Madhuca indica biodiesel and its blend with diesel International Journal of Green Energy 2015 Taylor and Francis SCOPUS 8178 -
5 Dr.D.Senthilkumar The Effect of TiO2 Coating in a Diesel Engine on Performance and Emissions of Radish Bio-Diesel Indian Journal of Science 2015 Discovery Publication     -
6 Dr K Muralidharan Effect of injection pressure on heat release rate and emissions in CI Engine using Honge Bio fuel International Journal of Applied Engineering Research (IJAER) 2015 Research India Publications   SCOPUS 19400157517 -
7 Dr S Mahalingam Taguchi based optimization of engine parameters of engine using nano catalyst with blends of biodiesel Applied Mechanics and Materials 2015 Trans tech publications SCOPUS 4700151914 -
8 Dr S Mahalingam Effect on performance and emission analysis of advanced ceramic material coated pison crown using plasma spray coating techniques Applied Mechanics and Materials 2015 Trans tech publications SCOPUS 4700151914 -
9 Dr S Mahalingam Effect of injectiontiming on performance and emission analysis of single cyliner diesel fulled with dual bio fuels International Journal of Applied Engineering Research (IJAER) 2015 Research India Publications   SCOPUS 19400157517 -
10 Mr.M.Senthil Kumar & P.Kumaravel Process Parameter Optimization for Pulse Electro Deposition of Nickel – Zinc Alloy from Chloride Bath. International Journal of Applied Engineering Research (IJAER) 2015 Research India Publications   SCOPUS 19400157517 -
11 Mr.M.Senthil Kumar Effect of Heat Treatment on Fatigue Strength of Steel International Journal of Applied Engineering Research (IJAER) 2015 Research India Publications   SCOPUS 19400157517 -
12 Mr.M. Senthil Kumar Fatigue Strength Evaluation of Ni-Zn Based Coating on Steel Through Electroplating International Journal of Applied Engineering Research (IJAER) 2015 Research India Publications   SCOPUS 19400157517 -
13 Mr.M.Suresh Fatigue Strength Evaluation of Ni-Zn Based Coating on Steel Through Electroplating International Journal of Applied Engineering Research (IJAER) 2015 Research India Publications   SCOPUS 19400157517  
14 Ms.P.Thamilarasi Effect of parameters on tensile strength of robotic GMAW International Journal of Applied Engineering Research (IJAER) 2015 Research India Publications   SCOPUS 19400157517 -
15 Ms.P.Thamilarasi Multi objective optimization of robotic GMAW process parameters using genetic algorithm International Journal of Applied Engineering Research (IJAER) 2015 Research India Publications   SCOPUS 19400157517 -
16 Mr.A.Ranjithkumar Investigation on mechanical properties of AL6082-Sic –Soda White lime glass powder metal matrix composite material International Journal of Applied Engineering Research (IJAER) 2015 Research India Publications   SCOPUS 19400157517 -
17 Mr.K.G.Saravanan Experimental investigation on dynamic characteristics of magneto rheological fluid suspension through on road comfort testing Applied Mechanics and Materials 2015 Trans tech publications SCOPUS 4700151914 -
18 Mr.K.G.Saravanan
To analyze the mechanical properties of Al-Sic metal matrix composites
International Journal of Applied Engineering Research (IJAER) 2015 Research India Publications   SCOPUS 19400157517 -
19 Mr.K.G.Saravanan structural analysis of non return control valve using finite element analysis International journal of enginering research and technology (IJERT) 2015 ESRSA Publications     -
20 Mr.K.G.Saravanan Analysis of Suspension Characteristics of Magneto-Rheological Fluid by Inquisition of Field Testing International Journal of Applied Engineering Research (IJAER) 2015 Research India Publications   SCOPUS 19400157517 -
21 Mr.M. Pradeep Kumar Development and Assessment of Stir Casting setup to improve MMC properties. International Journal of Applied Engineering Research (IJAER) 2015 Research India Publications   SCOPUS 19400157517 -
22 Mr.M.Manimurugan Performance Evaluation of compression ignition engine by diesel-biodiesel methylester blend International Journal of Applied Engineering Research (IJAER) 2015 Research India Publications   SCOPUS 19400157517 -
23 Mr.M.Srinivasan Synthesis and Characterization of Titanium Alloy (Ti-6Al-4V) by High Energy Ball Milling International Journal of Applied Engineering Research (IJAER) 2015 Research India Publications   SCOPUS 19400157517 -
24 Mr.E.Mohankumar Robotics GMAW – Weld Bead Geometry modeling using MATLAB script Approach Research Journal of Applied Sciences, Engineering and Technology 2015  Maxwell Science Publication SCOPUS 19869 -
25 Mr.U.Gobikrishnan Micro drilling studies on titanium alloy using micro electro chemical machining Australian Journal of Basic and Applied Sciences 2015 AENSI Publisher SCOPUS 19500157807 -
26 Mr.R.Prasanna Identification of Influencing Parameters for an Automobile Diaphragm Spring Clutch Using Design of Experiments International Journal of Applied Engineering Research (IJAER) 2015 Research India Publications   SCOPUS 19400157517 -
27 Mr.R.Venkatesan Development of low cost 3 axes Table top Micro Electro Discharge Machining (MicroEDM) International Journal of Applied Engineering Research 2015 Research India Publications SCOPUS 19400157517  
28 Mr.E.Mohankumar Effect of parameters on tensile strength of robotic GMAW International Journal of Applied Engineering Research (IJAER) 2015 Research India Publications   SCOPUS    
29 Mr.E.Mohankumar Multi objective optimization of robotic GMAW process parameters using genetic algorithm International Journal of Applied Engineering Research (IJAER) 2015 Research India Publications   SCOPUS 19400157517  
30 Ms.P.Thamilarasi Robotics GMAW – Weld Bead Geometry modeling using MATLAB script Approach Research Journal of Applied Sciences, Engineering and Technology 2015  Maxwell Science Publication SCOPUS 19869  
31 Dr D Senthilkumar Performance Evaluation of compression ignition engine by diesel-biodiesel methylester blend International Journal of Applied Engineering Research (IJAER) 2015 Research India Publications   SCOPUS 19400157517 -