NAAC-Accredited 'A' - Grade 2(f) & 12(B) status (UGC) |ISO
9001:2015 Certified | FIST Funded (DST) SIRO(DSIR)

Publications

International and National Journals

  1. Suresh, V. and Jegan, A., 2022. Experimental studies on wear and corrosion resistance of pulse electrodeposited Ni-TiO2 nanocomposite coatings on AISI 304 stainless steel. Materials Research Express, 9(12), p.126401.
  2. D.R. Joshua ,  A. Jegan, Experimental investigation and optimization of pulse electrodeposition parameters for Ni-TiO2 coating on Inconel 617 using TOPSIS technique, J. Ceram. Process. Res.2022, vol.23, no.1, pp.69 – 78 DOI : 10.36410/jcpr.2022.23.1.69
  3. D.R. Joshua,A. Jegan and A. Srinivasan,Multi Objective Optimization of  Pulse Electrodeposition of nano Ni-TiO2 and Ni-Al2O3 Coating on Inconel 617 Int. J. Electrochem. Sci., 17(2022) Article ID: 220418 (PDF 836 K) doi: 10.20964/2022.04.05
  4. L. Gokulanathan, A.Jegan,Optimization of  Pulsed Current Electrochemical  Micro Machining of MONEL 400 Alloy in NaNO3 Electrolyte Int. J. Electrochem.  Sci., 17(2022) Article ID: 220846 (PDF 1347 K) doi: 10.20964/2022.08.55
  5. L. Gokulanathan et al,Ergonomic design and fabrication of stair climbing wheelchair using rocker bogie mechanism,AIP Conference Proceedings 2393,  020196 (2022); https://doi.org/10.1063/5.0074761
  6. A. Mahendran, S. Lakshmana Kumar, R. Raj Jawahar,Metrological and tribological characteristics of carbon based nanotube,Materials Today: Proceedings,Volume 45, Part 7,2021,Pages 6393-6399,ISSN 2214 7853,https://doi.org/10.1016/j.matpr.2020.11.128.
  7. A. SRINIVASAN,A. JEGAN, Simulation Study of Balancing Arm Arrangement for Controlling Base Disturbances in Long Reach Manipulators, Vol. 27 No. 3 (2021)  DYNAMICS OF MECHANICAL SYSTEMS,DOI: https://doi.org/10.5755/j02.mech.27493
  8. Natarajan, P., Jegan, A., Mohanraj, M. (2020). Wear behavior of Ni-TiO2 nano-composite coating on AISI 1022 CS by pulse electrodeposition. Journal of New Materials for Electrochemical Systems, Vol. 23, No. 3, pp. 177-181. https://doi.org/10.14447/jnmes.v23i3.a04
  9. J S ShathishKumar and A Jegan,Tribological  Investigation of Nickel Nanocomposite Coated Piston Rings Reinforced with Multi-Walled Carbon Nanotubes,Int. J. Electrochem. Sci., 16 (2021) Article ID: 210429, doi: 10.20964/2021.04.38
  10. Saravanan Natarajan et al,Comparison of MA-g-PP effectiveness through mechanical performance of functionalised graphene reinforced polypropylene ,January 2020,Polímeros 30(3) DOI:10.1590/0104-1428.05620
  11. V. Suresh, A. Jegan, S. Lakshmana Kumar,Microstructure, mechanical and tribological characteristics of plasma and HVOF sprayed Cr3C2-PS.ZrO2 coatings,Materials Today: Proceedings,Volume 33, Part 1,2020,Pages 1137-1143,ISSN 2214-7853,https://doi.org/10.1016/j.matpr.2020.07.232.
  12. V. Suresh, A. Jegan, R. Mohan, A. Mahendran, L. Gokulanathan, Experimental study of heat transfer rate in a stainless steel heating element using nano coating,Materials Today: Proceedings,Volume 37, Part 2,2021,Pages 3743-3746,ISSN 2214-7853,https://doi.org/10.1016/j.matpr.2020.10.366.
  13. B. Srivijai , A.Jegan, B.Iniyaraja, E.Thirumurugan,Effect of Sintering Temperature on (Hss-Tic) Cutting Tool Life Enhancement for Cast Iron Machining, Vol. 83: May/June 2020,TEST Engineering & Management.
  14. L.Gokulanathan,A.Jegan,Electrochemical Micromachining of  Titanium Alloys- A Review,TEST Engineering & Management Vol. 83: May/June 2020
  15. C.Thangavel, Dr.A.Jegan, Dr.S.Natarajan. (2020). A Study of Selectively Deformable Structure of Wing of An Aırcraft. International Journal of Advanced Science and Technology, 29(7), 12191 - 12204. http://sersc.org/journals/index.php/IJAST/article/view/27912
  16. A. Mahendran,A. Jegan, L.Gokulanathan, V.Suresh,Design and Development of Non Intersecting Gear Mechanism by Forced Ball Drive Test Engineering & Management, May –June 2020,Page No. 11726-11730  
  17. L.Gokulanathan, A.Jegan, V.Suresh,A.Mahendran,Microhole Drilling of  Aluminium 6063 using Electrochemcial Micromachining,TEST Engineering & Management Vol. 83: May/June 2020
  18. J S ShathishKumar and A Jegan,Assessment on the microhardness and  corrosion resistance characteristics of Ni-SiC and Ni-MWCNT coatings  by pulse reverse electrodeposition technique Materials Research Express, Volume 7, Number 5,Doi.org/10.1088/2053-1591/ab8e6e
  19. A, Saravanan and P, Suresh and S, Arvidha Balaji and G, Sudharsan, Optimization of Heavy Duty Three Wheeler Front Suspension Coil Spring Using FEA (August 20, 2019). Proceedings of International Conference on Recent Trends in Computing, Communication & Networking Technologies (ICRTCCNT) 2019, http://dx.doi.org/10.2139/ssrn.3439977
  20. A Jegan Pulse electro deposition of Ni/Nano-Al2O3 Composite Coatings on Cast Iron Cylinder Liner, Materials Research, 21, 03, 01-Jun-2018.
  21. A Mahendran, A. Jegan & M Srinivasan , Design Of Fatigue Analysis of Wind Mill Gear Box , International Journal of Scientific Research And Innovations, 5, V, Page 17 - 24, 01-Jul-2018.
  22. A Jegan, Surface Modification Of Mild Steel by electro deposition Process With Ni-Zro2 , Advances In Natural and Applied Sciences, 9, 10, Page 49 - 53, 01-Jun-2016.
  23. S Natarajan, A Jegan & R Vivekananthan ,Grasp force Analysis of An Under actuated Robotic Finger with Spring Force Augmentation , International Journal Of Printing, Packing & Allied Sciences, 4, 6, Page 4,827 - 4,835, 01-Dec-2016.
  24. B Srivijai, A Jegan, M Babu& B. Iniyaraja ,Experimental on Conventional Metal Cutting- Understanding the Roles Played by various Cutting Parameters Tool Material HSS , Indian Journal Of Scientific Research, 20, 2, 01-Mar-2018.
  25. A. Saravanan, P. Suresh, V. Suresh ,Static Analysis And Weight Reduction Of Aluminium Casting Alloy Connecting Rod Using Finite Element Method , International Journal Of Mechanical and Production Engineering Research and Development (IJMPERD), 08, 03, Page 507 - 518, 01-Jun-2018.
  26. Suresh P, Kumaravel P, Gopikrishnan & G Sudharsan ,Experimental Investigation of Stainless Steel 316L , International Journal of Advanced Research In Basic Engineering Sciences And Technology (IJARBEST), 03, 38, Page 57 - 62, 01-Mar-2017.
  27. Gopikrishnan, K G Saravanan And M.Balaji ,Design And Analysis of Connecting Rod Using Aluminium Fly Ash , International Journal of Advanced Research In Basic Engineering Science And Technology, 4, 4, Page 250 - 256, 01-Apr-2018.
  28. Saravanan A &P. Suresh ,Investigation of Diesel Tank Pressure Using Numerical And Analytical Methods , International Journal of Mechanical Engineering & Technology, 8, 12, Page 407 - 416, 01-Dec-2017.
  29. P. Suresh, Venkatesan R, Sekar T ,Investigation And Multi Objective Optimization of MRR And TWR Using Taguchi Technique In Micro Electro Discharge Machining , Asian Journal of Research In Social Sciences And Humanities, 6, 6, Page 2,165 - 2,174, 01-Jun-2016.
  30. P. Suresh, P R Kannan, E Palaniswamy T ,Prediction of Surface Roughness Model for Nano Copper Suspended Electrochemically Machined Inconel 718 Using Anfis , Asian Journal Of Research In Social Sciences And Humanities, 6, Page 104 - 113, 01-Jun-2016.
  31. Saravanan A,P. Suresh, G.Sudharsan & V.Suresh, Static Analysis And Weight Reduction of Aluminium Casting Alloy Connecting Rod using Finite Element Method , International Journal of Mechanical And Production Engineering Research And Development, 8, 3, Page 507 - 518, 01-Jun-2018.
  32. Kannan P R, Palaniswamy E, Sekar T ,Nano Powder Mixed ECM Of Inconel 718 Using ANFIS and RSM , International Journal of Advanced Engineering Technology, 2, 7, Page 546 - 552, 01-May-2016.
  33. Gokulanathan.L, Balamurugan, S and Vasiga.D 2016. ‘Stainless Steel of AISI 304 to CORTEN Steel Joint Using Mag Welding Process’, International Journal of Current Research Vol. 7, Issue, 12, pp.24693-24700, December, 2015.

International conferences

  1. A Jegan, Design and Fatigue Analysis of Wind Mill Gear Box , International Conference on Scientific Research and Innovations (ICSRI), Chennai Institute of Technology and Atalon Product Centre Private Limited, 07-Apr-2018, 06-Apr-2018.
  2. A Jegan, Microstructure Assessment of High-Energy Ball Milled Nano SiC Particles , International Conference on Recent Advances in Technology, Engineering and Science., Department of Mechanical Engineering, 28-Jul-2016, 27-Jul-2016.
  3. P. Suresh, Study of MRR and Overcut on Titanium Alloy Using Micro ECM , DST-SERB Sponsored International Conference on Innovations in Science, Engineering and Technology, Muthayammal Engineering College, Rasipuram, 31-Mar-2018, 30-Mar-2018.
  4. P. Suresh, R Venkatesan ,Optimization of MRR and TWR in Micro Electro Discharge Machining of Stainless Steel 316L Using Taguchi Approach , International Conference on Advances in Biotechnology, Civil & Mechanical Science( ICABCMS – 2016), Selvam College of Technology, 18-Mar-2016, 17-Mar-2016.
  5. Saravanan A ,Analysis of Connecting Rod using HSLA Steel 4140 and AlS3 Casting Alloy Materials Using FEM , Third International Conference on Advances in Biotechnology, Civil & Mechanical Science, Selvam College of Technology, 17-Mar-2017.
  6. Sivakumar A, Navaeethakrishanan P, An Optimization Model for Improvement of Productivity and Quality Using Artificial Intelligence: A Research Article in Fabric Processing, International Conference on Sustainable Materials, Design and Applications 2016 (ICSMDA 2016), Kongu Engineering College, Perundurai, Erode, 18-Mar-2016.
  7. Finite Element Analysis of Bending and Dynamic Response of a Power Transmission Spur Gear, Advances in Mechanical Engineering, Chennai Institute of Technology, 23-Jun-2018, 22-Jun-2018.
  8. Gokulanathan.L, Comparative Analysis of Copper and Brass by Using Electro Chemical Micro Machining With FE-SEM Analysis, Futuristic Innovations in Mechanical Engineering and Manufacturing Management (ICFIMEMM-17), M.Kumarasamy College of Engineering, 30-March 2017.
  9. Gokulanathan.L, Advances in Engineering Science and Technology (ICAEST-16), Ergonomic Design and Fabrication of Stair Climbing Wheel Chair Using Rocker Bogie Mechanism, SBM College of Engineering and Technology, 4-March-2016.

National conferences

  1. A Jegan, Optimization of Pulse Electro deposition and Ni-Sic Nano Composite Coatings Using Response Surface Methodology , NCME 2018, Sona College of Technology, 02-Mar-2018.
  2. A Jegan, Surface Morphology and Wear Behaviour of Ni-Sic Nano Composite Coating by Pulse electro deposition , NCME 2018, Sona College of Technology, 02-Mar-2018.
  3. A Jegan, Comparative Experimental Evaluation of Nickel and Copper Alloy by Using Micro Electro Chemical Machining Setup , NCME 2018, Sona College of Technology, 02-Mar-2018.
  4. Study of Investigation of the Impact Behaviour Automotive Bumper Beam under Crashes, Innovation in Engineering and Technology, Narasu’s Sarathy Institute of Technology, Salem, 01-Apr-2016.
  5. Suresh P, Kumaravel P, Gopikrishnan G ,Experimental Investigation of Stainless Steel 316l Micro Electro Chemical Process Using RSM And ANFIS , AMSHE 2017, Department of Mechanical Engineering, SCT, 06-May-2017.
  6. G.Sudharsan, Experimental Investigation of Titanium using Micro-ECM , National Conference on Advancements in Mechanical, Manufacturing Civil Engineering (NCAMMCE-18), M.Kumarasamy College of Engineering, 09-Mar-2018.
  7. P.Kumaravel, Experimental and Numerical Investigation of Magneto Rheological based Semi Active Control Suspension System for Vehicle, AMSHE 2016, Knowledge Institute of Technology., 07-May-2016.
  8. Synthesis of Nanostructured Material Through High Energy Ball Milling , A National Conference on Advances in Mechanical Engineering NCME 2018, Department of Mechanical Engineering, 01-Mar-2018.
  9. Performance and Study of ECM on Metal Matrix By Using Taguchi Method , A National Conference on Advances in Mechanical Engineering, Department of Mechanical Engineering, 01-Mar-2018.
  10. Experimental Investigation on Inconel Alloy Using Micro Electro Machining , National Conference on Emerging Trends in Mechanical Engineering, Department of Mechanical Engineering, 02-Mar-2018.
  11. Investigation on Magneto Rheological Fluids Characteristics in Suspension System , National Conference on Emerging Trends in Mechanical Engineering, Department of Mechanical Engineering, 02-Mar-2018.
  12. Gokulanathan.L, Comparative Experimental Evaluation Nickel and Copper Alloy by using Micro Electro Chemical Setup , Advances in Mechanical Engineering NCME-2018, Mechanical Department, 01-Mar-2018.
  13. Gokulanathan.L, An Experimental Analysis of Micro Holes on Stainless Steel and Aluminium Using Micro-Electrochemical Machining, Innovations in Engineering and Technology-2017, Narasu’s Sarathy Institute of Technology, Salem, 18-March-2017.